| Image # | Thumbnail
(click to enlarge) | Description |
| 01 |  | An unmodified Phoenix |
| 02 |  | Removing the front panel |
| 03 |  | Removing the front panel (detail) |
| 04 |  | Front panel removed |
| 05 |  | Display board before removal |
| 06 |  | Closeup of the display board |
| 07 |  | Removing the display board |
| 08 |  | Back side of the display board (now removed) |
| 09 |  | Front side of the display board (now removed) |
| 10 |  | Front panel missing display board |
| 11 |  | Volume and on/off control before removal |
| 12 |  | The top removed from the (cheap) volume control |
| 13 |  | Another view of the volume control |
| 14 |  | After volume and on/off control removal |
| 15 |  | Display mounting to the front panel |
| 16 |  | Removing the display from the front panel |
| 17 |  | Cut on the black line... |
| 18 |  | After the cut |
| 19 |  | After the cut (detail) |
| 20 |  | After the cut (front view) |
| 21 |  | Display board fitted into a custom control head |
| 22 |  | Display board fitted into a custom control head (rear view) |
| 23 |  | Display board fitted into a custom control head (front view) |
| 24 |  | Control head construction |
| 25 |  | Relay keying transmitter on switch |
| 26 |  | Relay wiring detail |
| 27 |  | Control head construction |
| 28 |  | Control head construction |
| 29 |  | Completed control head |
| 30 |  | Control head interfaced directly to the radio |
| 31 |  | Wiring the DB-25 into the radio |
| 32 |  | Wiring the DB-25 into the radio |
| 33 |  | Wiring the DB-25 into the radio |
| 34 |  | Wiring the DB-25 into the radio |
| 35 |  | Pull-up resistor for channel change functionality |
| 36 |  | Wiring the DB-25 into the radio |
| 37 |  | Trace cut |
| 38 |  | Volume control/on-off switch wiring |
| 39 |  | Rear of the Syntor X9000 control head |
| 40 |  | X9000 head open |
| 41 |  | X9000 wire connected |
Members Contributions 
